Touch-Plate’s WCR-D30L Digital Relay (World Class Relay) is a 20Amp Replacement relay for our modern Touch-Plate Calypso systems installed 2008-present. 

The most common installation of these systems is in commercial environments that require dynamic lighting controls. The WCR-D30L Digital Latching Relay is designed for projects needing a high current rated latching relay with a manual override.

Easily mounts to the din rail in the panel making installation or replacement easy.

The WCR-D30L is compatible with a Touch-Plate Relay Control Board; controlled by Time-Keeper® or ZoneZ Master.

WCR-D30L Specifications

• Digital Wire Contact Relay
• Manual override switch on top of each relay
• Mechanical feedback circuit
• Dielectric Strength (between coil and contacts): > 4000VAC
• Operating Temperatures: -40°C to 40°C
• Contacts: AgSnO2
• Mechanical Endurance: 1 million cycles
• Max Switching Power: 10K VA
• Max Switching Voltage: 440VAC
• Max Switching Current: 32 Amps
• Lamp Load: up to 5000 Watts
• Rated for: 30 Amp Ballast; 120VAC -277VAC
• Rated: 20 Amp Tungsten; 120VAC
• UL Listed

Load Compatibility

• Incandescent lighting
• Fluorescent lighting
• LED lighting
• Magnetic low-voltage lighting
• Electronic low-voltage lighting

Terminal Tightening Torque

• Minimum = 0.5 Nm / 4.4 in-lbs
• Maximum = 0.6 Nm / 5.3 in-lbs

WCR-D30L Dimensions

• Height: 1.92″
• Width: 2.00″
• Depth: 3.40″