Have your lights stopped working?  No longer hearing the soft “thunk” of your lights toggling on and off?  These are signs that you might have a worn-out relay! Touch Plate’s 3000 Relay is a 2-Wire Low-Voltage Relay.  The cylindrical relay is directly mounted to the switching block and 7” wires extend from the top.

The 20 Amp 3000 relay is a mechanically latching relay utilizing “Contact Closure” low- voltage switch technology. The relay only switches directly ON/OFF, this feature is technically known as “Single Pole, Single Throw” (SPST).

3000 Relay is a direct replacement for part number(s): 1550-A, 1550-B, 2500-B, & 4000.

                (there is a difference in the size of the switching block (base) with the older models)

Previous generation relays had 4 wires, 2 low-voltage wires extruding from the top of the cylinder which connected to the switches and transverter and 2 wires extending from the bottom that connected to line-voltage.

The 3000 Relay. You can mount the line-voltage feed wires into the screw terminals on the switching block. The 2 attached wires are still connected to your switch.

Note: The line-voltage terminals are not polarized.  It does not matter which terminal you feed your line-voltage into.

Technical Details:

20 Amp Mechanically Latching Relay

Contacts:

• 0HP | 125VAC | 25A | 125VAC Tungsten
• 5HP | 250VAC | 20A | 277VAC Ballast

Coil:

• Pulsed at 28VDC, .05 SEC
• Power Supply: TVR-1 | TPS-0120. Class 2 Only
• 60/75°C, Copper Conductors Only
• Torque to Minimum 25 in./lb.

Included in box:

• (1) Relay
• (1) Rubber Grommet

Made In Fort Wayne, IN USA.

Need help troubleshooting your Touch-Plate system? There are multiple ways to get started!  First, you can check our Customer Support section here on the website.  We have ALL the documentation on the products you’re dealing with downloadable online from touchplate.com

Would you rather work with someone directly?  You can email questions & pictures to
[email protected] and a team member will respond to you as quickly as possible.   You can also give us a call during our regular business hours at (260)426-1565.   We look forward to helping you get the lights back on!